Our Process
Prep is key
Caulking Control Joints
Caulking Control Joints
A professional diamond cut floor grinder will remove any surface contamination, sealers, and existing coatings. Aggressive grit diamonds open the pores of the concrete to allow proper and full adhesion.
Caulking Control Joints
Caulking Control Joints
Caulking Control Joints
Control Joints often become a dirt traps for any garage. By filling them mostly up it will all them to still channel water but not be a trap.
Fill Joints and Cracks
Caulking Control Joints
Fill Joints and Cracks
Cracks are repaired with a 2 part repair compound that is stronger than concrete.
Apply Basecoat
Apply Basecoat
Fill Joints and Cracks
When prep is finished the polyaspartic membrane is applied. Our product can expand and contract with the extreme temperature changes in Utah. It is less brittle and flexible than epoxy.
Texture Flakes
Apply Basecoat
Texture Flakes
Textured vinyl flakes are applied to the basecoat. Flakes bond to the basecoat and cover the entire floor until the bottom coat is no longer visible. Once cured, the loose flakes are scaped & removed for final coat. Custom logos can also be applied here.
Apply Topcoat
Apply Basecoat
Texture Flakes
The polyaspartic top coat (polyurea) is UV stable and designed for heavy traffic. It will protect against stains, moisture and harsh chemicals.
After Project Completion
A project can often be completed in 1-2 days depending on the size and customizations. Many garages can be completed in 1-DAY! Curing times differ depending on the temperature, but many are cured within 4-6 hours. We recommend waiting 24 hours before driving on your resurfaced concrete. Enjoy the satisfaction that your floors will be protected and beautiful!
